Manual Range 1000V Digital Smart Multimeter Sine Wave Signal RMS Measurement
Manual Range 60Hz Digital Multimeter With 9V Battery (6F22)
Description:
Ambient temperature: 23 ± 5 ℃ Relative humidity: <75%
3.2.1 True rms zero input
3.2.1.1 The measurement of sine wave signal, the use of true RMS measurement method than the traditional average response method error is small.
3.2.1.2 True RMS The instrument can accurately measure the sine wave signal, but if it is on the AC function, the instrument may display 1 to 50 if the measured signal is not input (shorted at the AC voltage range and the input terminal) Word between a reading. These deviations are normal. Within the specified measuring range, they do not affect the accuracy of the multimeter to measure alternating current.
3.2.1.3 True RMS requires that the input signal reach a certain level for measurement. Therefore, the AC voltage and current range is specified between 2% and 100% of full scale.
GENERAL
The instrument is a stable and good performance digital multimeter driven by battery.
It uses the LCD with 63*31mm figure to make the reading clear. Unit symbol
displaying, backlight and the function of overload protection make operation is
convenient.
The instrument has the function of measuring DCV, ACV, DCA, ACA, resistance,
capacitance, inductance, temperature and frequency, and diode, triode and
continuity test. The instrument takes dual-integral A/D converter as key point, is an
excellent tool.
Specification:
| DC current |
2mA/20mA/200mA/20A |
| AC current |
2mA/20mA/200mA/20A |
| DC Voltage |
200mV/2V/20V/200V/1000V |
| AC Voltage |
200mV/2V/20V/200V/750V |
| Resistance |
200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ/200MΩ |
| Capacitance |
20mF |
| Temperature |
-20 to 1000°C, -4 to 1832°F |
| Frequency |
60Hz |
| Operation mode |
Manual range |
| Maximum display |
1999 |
| Power |
9V battery (6F22) |
| Display size |
63x32mm |
Product Tags:
|
|
Manual Range 1000V Digital Smart Multimeter Sine Wave Signal RMS Measurement Images
|
